太阳集团2018登录网址(中国)官方网站

您好、欢迎访问本网站!

张禹

发布日期:2022-03-11  来源:   点击量:

姓名

张禹

联系方式

010-67396168

性别

邮箱

zhangyumse@bjut.edu.cn

学位

博士

职称

副研究员

学术兼职

    留学经历

    教学课程

主要研究方向

1.轻合金焊接冶金(裂纹敏感性、溶质偏析以及纳米强化相析出动力学等);

2.多物理场耦合仿真;

3.新型车用薄板连接工艺。

主要科研项目

1.国家自然科学基金青年科学基金项目 No. 51905300 铝合金压印-点焊复合连接工艺及其接头强韧化研究    负责人/在研

2.北京工业大学国际科研合作种子基金项目 2021B27基于液-固相分数演化计算的镁合金电阻点焊液化裂纹机理研究    负责人/在研

3.中国博士后科学基金面上项目 2018M641340 脉冲调制铝合金钨极氩弧焊裂纹抑制及枝晶调控机理研究    负责人/结题

主要学术成果(论文、专利、专著、译著等)

[1] Zhang Y, Luo Z, Li Y, Liu Z, Huang Z. Microstructure characterization and tensile properties of Mg/Al dissimilar joints manufactured by thermo-compensated resistance spot welding with Zn interlayer[J]. Materials & Design, 2015, 75: 166-173. SCI IF=5.77

[2] Zhang Y, Li Y, Luo Z, Yuan T, Bi J, Wang Z M, Wang Z P, Chao Y J. Feasibility study of dissimilar joining of aluminum alloy 5052 to pure copper via thermo-compensated resistance spot welding[J]. Materials & Design, 2016, 106: 235-246. SCI IF=5.77

[3] Zhang Y, Shan H, Li Y, Guo J, Luo Z, Ma C Y. Joining aluminum alloy 5052 sheets via novel hybrid resistance spot clinching process[J]. Materials & Design, 2017, 118: 36-43. SCI IF=5.77

[4] Zhang Y, Wang C, Shan H, et al. High-toughness joining of aluminum alloy 5754 and DQSK steel using hybrid clinching–welding process[J]. Journal of Materials Processing Technology, 2018. SCI IF=4.178

[5] Zhang Y, Shan H, Luo Z, Li Y, Bi J, Guo J, Gao F. Temperature field and microstructure characterization of AA6061/H70 dissimilar thermo-compensated resistance spot welds having different joint configurations[J]. Journal of Manufacturing Processes, 2017, 28: 336-342. SCI IF=3.462

[6] Zhang Y, Zhang X, Guo J, et al. Effects of local stiffness on the spot joints mechanical properties: Comparative study between resistance spot welding and resistance spot clinching joints[J]. Journal of Manufacturing Processes, 2019, 39: 93-101. SCI IF=3.462

[7] Zhang Y, Shan H, Li Y, Zhao C F, Luo Z, Guo J, Ma C Y. Effects of the oxide film on the spot joining of aluminum alloy sheets: a comparative study between resistance spot welding and resistance spot clinching[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(9-12): 4231-4240. SCI IF=2.496

[8] Zhang Y, Li Y, Luo Z, Feng Y, Zhou J. Effect of joint design on the failure behaviour of three-stack-up austenitic stainless steel resistance spot welds[J]. Science and Technology of Welding and Joining, 2016, 21(6): 484-492. SCI IF=2.358

[9] Zhang Y, Li Y, Zhu Z, Luo Z, Sunusi M. Manladan. Bake-strengthening of Resistance Spot welded aluminum alloy 6061. Welding Journal. 2019, 98(11): 337S-350S. SCI IF=1.34

[10] Du H, Bi J, Zhang Y*, et al. The role of the partial melting zone in the nugget growth process of unequal-thickness dissimilar aluminum alloy 2219/5A06 resistance spot welding[J]. Journal of Manufacturing Processes, 2019, 45: 304-311. SCI IF=3.462

[11] Zhang Y*, Guo J, Li Y, et al. A comparative study between the mechanical and microstructural properties of resistance spot welding joints among ferritic AISI 430 and austenitic AISI 304 stainless steel[J]. Journal of Materials Research and Technology, 2020, 9(1): 574-583. SCI IF=3.327

个人自述(个人经历、获奖情况等)

张禹,校聘研究员,博士生导师。2018年6月于天津大学获得材料加工工程博士学位,随后进入清华大学机械系开展博士后工作。2020年8月获得北京工业大学“优秀人才计划”支持,进入材料与制造学部工作。主要从事轻合金焊接冶金基础理论研究。近5年,在Materials & Design、Journal of Materials Processing Technology等业内高影响力期刊发表SCI收录文章20余篇,被引用频次100余次,获批国家发明专利3项,受邀担任多个国际期刊审稿人。主持/参与国家自然科学基金、中国博士后科学基金项目多项。

个人风采照

 

 

上一条:刘俊杰

下一条:肖家文

招生咨询


本科招生     010-67391758


研究生招生  010-67392281(机械工程系)
                 010-67392383(材料科学与工程系、激光工程研究院)

资料下载

北京工业大学

   材料与制造学部

北京市朝阳区平乐园100号 邮编:100124